``` Product: FRITZ!Repeater 3000 AX Version: FRITZ!OS 7.57 Language: English, French, Italian, Spanish, Polish, Dutch, German Release Date: 09/04/2023 ``` **New features with FRITZ!OS 7.56** - Changed country and language settings of the FRITZ!Box (Mesh Master) are automatically transmitted to the FRITZ!Repeater - Better dynamic smart repeating provides higher data throughputs for devices that are connected with the FRITZ!Repeater - Improved handling of radar detection and Wi-Fi auto channel - Support for the simplified replacement of a FRITZ!Box with new wizard (FRITZ!Box with FRITZ!OS 7.55) **Further Improvements of FRITZ!OS 7.57** - **Fixed** stability and security increased **Improvements and changes with FRITZ!OS 7.56** Improved - Optimized system performance and stability Improved - Corrections to details in the settings for individual names for the Wi-Fi networks Improved - Improvements for the channel selection settings Improved - Improved detection and automatic handling of network loops Improved - Calculation of radar wait time (DFS) based on a frequency range with a channel bandwidth of 20 MHz Improved - Handling for display of connections when using certain network switches Improved - Improved automatic channel selection on the 5-GHz band in cases of Radar interference (7530) Improved - Changed behavior of buttons at the lower end of the page Improved - Several improvements of the user interface Changed - The push service for the Wi-Fi guest access sends registration/deregistration events of the guest devices from the Mesh Repeater or Mesh Master with which they are registered Changed - Expanded keyword search in the menu under "Help and Info"; display of results in the Help Changed - New contents under "Help and Info > Get to Know the Functions" Changed - MAC Filter is limited to 128 entries **Improvements in FRITZ!OS 7.41** - **Improved** Wi-Fi performance and stability in various situations - **Improved** System stability - **Improved** Several smaller corrections for the user interface - **Change** Expanded keyword search in the menu under "Help and Info"; display of results in the Help - **Change** New contents under "Help and Info > Get to Know the Functions" - **Fixed** Manual channel selection also enabled for channels that do not have the maximum channel width - **Fixed** LED did not signal start of WPS via the user interface - **Fixed** A white space was displayed when the auto update level was changed ------------------------------------------------ **[1] Automatic detection an configuration of operating mode** For configuration of a FRITZ!Repeater in "LAN Bridge" mode (using a repeater connected with the FRITZ!Box by cable as the wireless access point), previously the FRITZ!Repeater user interface had to be opened. Making this setting is no longer necessary with this lab version - the FRITZ!Repeater automatically detects the operating mode. - Factory settings must be configured in the FRITZ!Repeater (to reset the factory settings: Wait 2 minutes for the FRITZ!Repeater to be completely startet, than press and hold the button on the repeater for at least 15 seconds). - Remove the repeater from the outlet. - Connect the FRITZ!Repeater with any LAN port on the FRITZ!Box via LAN cable. - Insert the FRITZ!Repeater into an electrical outlet. Upon starting, the repeater is already set to "LAN Bridge" mode. - Now enable the repeater for Mesh (press briefly on the button on the repeater, and briefly on the "Connect/WPS" or "WPS" button on the FRITZ!Box). Now the repeater adopts the settings and forms a Mesh Wi-Fi with the FRITZ!Box. More information on this subject is available at en.avm.de/mesh. - If you want to switch back to a connection of the FRITZ!Repeater to the FRITZ!Box via WiFi, remove the LAN-cabel from the FRITZ!Repeater and repeat the process without connecting a LAN-Cable ------------------------------------------------ **Restoring factory defaults** To reset the FRITZ!Repeater to factory settings: Wait 2 minutes for the FRITZ!Repeater to be completely startet, then press and hold the button on the repeater for at least 15 seconds ------------------------------------------------ **Enabling the Mesh Function** To check whether a FRITZ! product is enabled for Mesh, see the "Mesh Overview" of the FRITZ!Box (the Mesh Master) under "fritz.box / Home Network / Mesh". Here the products in the Mesh are designated with a corresponding "Mesh active" icon. A FRITZ!Repeater or FRITZ!Powerline adapter can be enabled for Mesh in various ways: - If the FRITZ!Repeater or FRITZ!Powerline adapter has the factory settings configured and is being connected with the FRITZ!Box via WPS for the first time, it will be automatically enabled for Mesh. - If the FRITZ!Repeater or FRITZ!Powerline adapter is already connected, but not enabled for Mesh, it is added to the Mesh by pressing a button on the product to be integrated and a button on the FRITZ!Box. On the FRITZ!Box, use the button that initiates WPS: depending on the model, press the "Connect" or "WPS" button briefly, or the "WLAN/WPS" button for 6 seconds Detailed instructions, additional information and the answers to frequently asked questions about Mesh are presented at en.avm.de/mesh-faq. ----------------------------------------------- **Set factory default** For restoring the repeater to factory defaults, press the "Connect" button for 15 seconds ----------------------------------------------- We recommend to always keep all your FRITZ!-Products up to date as every update also improves security features of FRITZ!Box and FRITZ!Repeater KSH/SST20230904